Home Brushless Motors Servos, Leads, Acc Connectors & Bullet plugs 250 Multi copter Kits Multicopter Frames Multicopter Parts FPV, Goggles, TX, RX, ACC Radios And Receivers Props Flight Controllers FPV Cameras Batterys & Chargers ESCs / Ubecs / PDB Tools & Accessories  LED Lights Dual Lock and Tape
Home Special Offers Postage Details About Us Contact Us Links
View Cart

Tel 01803 897122

Check out our Feedback via our ebay store Just click this text.

High-power and high-performance circuit

The G.T. Power 3B6-D charger features 3 totally independent power outputs. Each can charge up to 60 watts with a total output power of 180 watts.

The 3B6-D can charge or discharge up to 3 x 6S Lithium batteries. Each output can charge up to 6A (depending upon cells/watts).


Three Individual balancers are built in for use with Lithium batteries.

The Lithium cells are also balanced when discharging.

If the voltage of any one cell is outside of specification, the charging/discharging will be stopped for safety reasons with an error message.

Accept various types of Lithium battery.

Lithium battery 'Fast' and 'Storage' mode

'Fast' charge reduces the charging time of Lithium batteries but not quite fully charging them and 'Storage' mode should be used for long term storage of your Lithium battery packs

Maximum safety for NiCd/NiMh cells

The automatic charging program works on the principle of the Delta-peak voltage detection for NiCd/NiMH cells.

Auto-charge current limit: When charging NiCd or NiMH at 'AUTO' current mode, you can set the upper limit of change current to avoid from high current charging. This is very useful when charging the low impedance and small capacity NiMH battery in 'AUTO' mode.

Capacity limit: The changing capacity is calculated by multiple of the charging

current and time. If the charging capacity exceeds the limit the b attery the charging will be stopped when it reaches the previously user set value.

Temperature limit: The temperature of the battery on charging will rise by its internal chemical reaction.

If you set the limit of temperature the charging will stop when this user set limit is reached.

Processing time limit: you can also set the maximum charging/discharging.

Input power monitor: To protect the car battery you are using to power the charger.

Automatic cooling fan: The cooling fan operates automatically when the internal temperature of the charger is raised.

Data store/load

For users convenience it can store maximum 5 data of different batteries. You can establish the data contains program setting of the battery to charge or discharge continually. These data can be called out at any time you need and the process can be executed without program setting.

Cyclic charging/discharging

Perform 1 to 5 cycles of charge/discharge or discharge/charge continually for battery refreshing and balancing. Not recomended for Lithium cells.

Features

Capacity Limit

Maximum safety

Temperature monitoring

Input power monitoring

Easy to program buttons

5 battery memory

Individual cell monitoring

2-Line Back lit LCD display

Built in Balancer to 6S packs

Cycle charging/discharging

Includes "FAST" & "STORAGE" Li-xx programs

Product Details

Input Voltage: 11.0-18.0VDC or 220-240VAC

Charging Power: Max 180W (3x60W)

Discharging Power: Max 15W (3x5W)

Charging current: 0.1-6A

Discharging current: 0.1-1.0A

1-15 NiCd/NiMh Cells

1-6 Lipo/LiIon/LiFe Cells

1-10 Lead-acid cells (2V-20V)

Balancing accuracy: 10mV

Balancing current Lixx: 300mA/Cell

Dimension: 230mm x 158mm x 60mm

Weight: 995g

Includes:

1 x Charger

1 x Mains cable fitted with 3 pin UK style plug

1 x XT60 Plug and Crocodile Clips to connect to car battery for DC input

1 x JST-XH balance boards.

1 x Tamiya charge lead

1 x JST/BEC charge lead

1 x Futaba Rx charge lead

1 x Crocodile charge lead

1 x Heavy Duty bare ended charge lead

1 x Manual

G.T.POWER Lipo Charger 3B6-D

£79.95